1.Single end, integrated cartridge type, can be rotated in both directions without being affected by the adjustment of the pump shaft;
2. The axial dimension of the overall component should be larger than the installation dimension, so that the positioning block can be easily removed when it is installed;
3. Before starting the equipment, open the flushing water enough. Do not leave the oil seal in dry friction. The water pressure must not be too high (≤0.08 MPa).
4. The mechanical seal runs completely in the medium, has strong anti-blocking ability, and is suitable for high concentration conditions;
5. The material of the friction pair is L pad inlaid with hard alloy and silicon carbide, which can run for a long time in high temperature media, and different friction pairs can be selected according to different media to ensure its long-term use effect.
Scope of application:
Medium: alumina slurry, limestone, gypsum slurry, ore dressing slurry, coal washing slurry and other solid particles and crystalline fluids;
Temperature: -20 ℃ ～ 160 ℃;
Linear speed: ≤15 m / s;
Shaft diameter: Φ60-Φ 320.